Hacked By AnonymousFox
| Current Path : /proc/self/root/sbin/ |
|
|
| Current File : //proc/self/root/sbin/lvm_import_vdo |
#!/bin/bash
#
# Copyright (C) 2021-2023 Red Hat, Inc. All rights reserved.
#
# This file is part of LVM2.
#
# This copyrighted material is made available to anyone wishing to use,
# modify, copy, or redistribute it subject to the terms and conditions
# of the GNU General Public License v.2.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
#
# Author: Zdenek Kabelac <zkabelac at redhat.com>
#
# Script for importing VDO volumes to lvm2 managed VDO LVs
#
# Needed utilities:
# lvm, dmsetup,
# vdo,
# grep, awk, sed, blockdev, readlink, stat, mkdir, truncate
#
# Conversion is using 'vdo convert' support from VDO manager to move
# existing VDO header by 2M which makes space to place in PV header
# and VG metadata area, and then create VDOPOOL LV and VDO LV in such VG.
#
set -euE -o pipefail
TOOL=lvm_import_vdo
IMPORT_NAME="VDO_${TOOL}_${RANDOM}$$"
test ${#IMPORT_NAME} -lt 100 || error "Random name \"$IMPORT_NAME\" is too long!"
TEMPDIR="${TMPDIR:-/tmp}/$IMPORT_NAME"
_SAVEPATH=$PATH
PATH="/sbin:/usr/sbin:/bin:/usr/sbin:$PATH"
# Set of trapped signals
declare -a SIGNALS=("HUP" "INT" "QUIT" "ABRT" "TERM" "EXIT")
# user may override lvm location by setting LVM_BINARY
LVM=${LVM_BINARY:-lvm}
VDO=${VDO_BINARY:-vdo}
BLOCKDEV="blockdev"
LOSETUP="losetup"
READLINK="readlink"
READLINK_E="-e"
STAT="stat"
MKDIR="mkdir"
TRUNCATE="truncate"
DMSETUP="dmsetup"
DM_DEV_DIR="${DM_DEV_DIR:-/dev}"
DM_UUID_PREFIX="${DM_UUID_PREFIX:-}"
DM_VG_NAME=
DM_LV_NAME=
DEFAULT_VDO_CONFIG="/etc/vdoconf.yml" # Default location of vdo's manager config file
VDO_CONFIG=${VDO_CONFIG:-} # can be overridden with --vdo-config
VDO_CONFIG_RESTORE=
VDOCONF=
test -n "$VDO_CONFIG" && VDOCONF="-f $VDO_CONFIG"
DEVICE=
VGNAME=
LVNAME=
DEVMAJOR=0
DEVMINOR=0
PROMPTING=
USE_VDO_DM_SNAPSHOT="--yes"
VDO_DM_SNAPSHOT_NAME=
VDO_DM_SNAPSHOT_DEVICE=
VDO_SNAPSHOT_LOOP=
VDO_INCONSISTENT=
DRY=0
VERB=
FORCE=
YES=
ABORT_AFTER_VDO_CONVERT=0
VDO_ALLOCATION_PARAMS=
# default name for converted VG and its VDO LV
DEFAULT_NAME="vdovg/vdolvol"
NAME=""
# predefine empty
vdo_ackThreads=
vdo_bioRotationInterval=
vdo_bioThreads=
vdo_blockMapCacheSize=
vdo_blockMapPeriod=
vdo_compression=
vdo_cpuThreads=
vdo_deduplication=
vdo_hashZoneThreads=
vdo_indexMemory=
vdo_indexSparse=
vdo_logicalBlockSize=
vdo_logicalThreads=
vdo_maxDiscardSize=
vdo_physicalThreads=
vdo_slabSize=
vdo_writePolicy=
# help message
tool_usage() {
echo "${TOOL}: Utility to convert VDO volume to VDO LV."
echo
echo " ${TOOL} [options] <vdo_device_path>"
echo
echo " Options:"
echo " -f | --force Bypass sanity checks"
echo " -h | --help Show this help message"
echo " -n | --name Specifies VG/LV name for converted VDO volume"
echo " -v | --verbose Be verbose"
echo " -y | --yes Answer \"yes\" at any prompts"
echo " --dry-run Print verbosely commands without running them"
echo " --no-snapshot Do not use snapshot for converted VDO device"
echo " --uuid-prefix Prefix for DM snapshot uuid"
echo " --vdo-config Configuration file for VDO manager"
exit
}
verbose() {
test -z "$VERB" || echo "$TOOL:" "$@"
}
# Support multi-line error messages
error() {
for i in "$@" ; do
echo "$TOOL: $i" >&2
done
return 1
}
warn() {
echo "$TOOL: WARNING: $i" >&2
}
dry() {
if [ "$DRY" -ne 0 ]; then
verbose "Dry execution" "$@"
return 0
fi
verbose "Executing" "$@"
"$@"
}
cleanup() {
RC=$? # Return code + 128 of the last command eg INT=2 + 128 -> 130
trap '' "${SIGNALS[@]}" # mute trap for all signals to not interrupt cleanup() on any next signal
[ -z "$PROMPTING" ] || echo "No"
[ -e "$VDO_CONFIG_RESTORE" ] && { dry cp -a "$VDO_CONFIG_RESTORE" "${VDO_CONFIG:-"$DEFAULT_VDO_CONFIG"}" || true ; }
if [ -n "$VDO_DM_SNAPSHOT_NAME" ]; then
dry "$LVM" vgchange -an --devices "$VDO_DM_SNAPSHOT_DEVICE" "$VGNAME" &>/dev/null || true
for i in {1..20} ; do
[ "$(dry "$DMSETUP" info --noheading -co open "$VDO_DM_SNAPSHOT_NAME")" = "0" ] && break
sleep .1
done
dry "$DMSETUP" remove "$VDO_DM_SNAPSHOT_NAME" &>/dev/null || true
fi
[ -n "$VDO_SNAPSHOT_LOOP" ] && { dry "$LOSETUP" -d "$VDO_SNAPSHOT_LOOP" || true ; }
[ -z "$VDO_INCONSISTENT" ] || echo "$TOOL: VDO volume import process exited unexpectedly!" >&2
rm -rf "$TEMPDIR" || true
exit "$RC"
}
# Create snapshot target like for persistent snapshot with 16KiB chunksize
snapshot_target_line_() {
echo "0 $("$BLOCKDEV" --getsize "$1") snapshot${3:-} $1 $2 P 32"
}
snapshot_create_() {
VDO_DM_SNAPSHOT_NAME="${IMPORT_NAME}_snap"
local file="$TEMPDIR/$VDO_DM_SNAPSHOT_NAME"
# TODO: maybe use ramdisk via 'brd' device ?)
"$TRUNCATE" -s 20M "$file"
VDO_SNAPSHOT_LOOP=$("$LOSETUP" -f --show "$file")
"$DMSETUP" create "$VDO_DM_SNAPSHOT_NAME" -u "${DM_UUID_PREFIX}${VDO_DM_SNAPSHOT_NAME}-priv" --table "$(snapshot_target_line_ "$1" "$VDO_SNAPSHOT_LOOP")"
VDO_DM_SNAPSHOT_DEVICE="$DM_DEV_DIR/mapper/$VDO_DM_SNAPSHOT_NAME"
verbose "Snapshot of VDO device $1 created: $VDO_DM_SNAPSHOT_DEVICE."
}
snapshot_merge_() {
local status
local initial_status
initial_status=( $("$DMSETUP" status "$VDO_DM_SNAPSHOT_NAME") )
"$DMSETUP" reload "$VDO_DM_SNAPSHOT_NAME" --table "$(snapshot_target_line_ "$1" "$VDO_SNAPSHOT_LOOP" -merge)"
"$DMSETUP" suspend "$VDO_DM_SNAPSHOT_NAME" || {
error "ABORTING: Failed to initialize snapshot merge! Origin volume is unchanged."
}
verbose "Merging converted VDO volume \"$VDO_DM_SNAPSHOT_NAME\"."
VDO_INCONSISTENT=1
# Running merging
"$DMSETUP" resume "$VDO_DM_SNAPSHOT_NAME"
#du -h "$TEMPDIR/$VDO_DM_SNAPSHOT_NAME"
# Loop for a while, till the snapshot is merged.
# Should be nearly instantaneous.
# FIXME: Recovery when something prevents merging is hard
for i in $(seq 1 20) ; do
status=( $("$DMSETUP" status "$VDO_DM_SNAPSHOT_NAME") )
# Check if merging is finished
[ "${status[3]%/*}" = "${status[4]}" ] && break
# Wait a bit and retry
sleep .2
done
if [ "${status[3]%/*}" != "${status[4]}" ]; then
# FIXME: Now what shall we do ??? Help....
# Keep snapshot in DM table for possible analysis...
VDO_DM_SNAPSHOT_NAME=
VDO_SNAPSHOT_LOOP=
echo "$TOOL: Initial snapshot status ${initial_status[*]}"
echo "$TOOL: Failing merge snapshot status ${status[*]}"
error "ABORTING: Snapshot failed to merge! (Administrator required...)"
fi
VDO_INCONSISTENT=
VDO_CONFIG_RESTORE=
verbose "Converted VDO volume is merged to \"$1\"."
"$DMSETUP" remove "$VDO_DM_SNAPSHOT_NAME" || {
sleep 1 # sleep and retry once more
"$DMSETUP" remove "$VDO_DM_SNAPSHOT_NAME" || {
error "ABORTING: Cannot remove snapshot $VDO_DM_SNAPSHOT_NAME! (check volume autoactivation...)"
}
}
VDO_DM_SNAPSHOT_NAME=
"$LOSETUP" -d "$VDO_SNAPSHOT_LOOP"
VDO_SNAPSHOT_LOOP=
}
get_enabled_value_() {
case "$1" in
enabled) echo "1" ;;
*) echo "0" ;;
esac
}
get_kb_size_with_unit_() {
case "$1" in
*[kK]) echo $(( ${1%[kK]} )) ;;
*[mM]) echo $(( ${1%[mM]} * 1024 )) ;;
*[gG]) echo $(( ${1%[gG]} * 1024 * 1024 )) ;;
*[tT]) echo $(( ${1%[tT]} * 1024 * 1024 * 1024 )) ;;
*[pP]) echo $(( ${1%[pP]} * 1024 * 1024 * 1024 * 1024 )) ;;
esac
}
# Figure out largest possible extent size usable for VG
# $1 physical size
# $2 logical size
get_largest_extent_size_() {
local max=4
local i
local d
for i in 8 16 32 64 128 256 512 1024 2048 4096 ; do
d=$(( $1 / i ))
[ $(( d * i )) -eq "$1" ] || break
d=$(( $2 / i ))
[ $(( d * i )) -eq "$2" ] || break
max=$i
done
echo "$max"
}
# detect LV on the given device
# deference device name if it is symbolic link
detect_lv_() {
local DEVICE=$1
local SYSVOLUME
local MAJORMINOR
DEVICE=${1/#"${DM_DEV_DIR}/"/}
DEVICE=$("$READLINK" $READLINK_E "$DM_DEV_DIR/$DEVICE" || true)
[ -n "$DEVICE" ] || error "Readlink cannot access device \"$1\"."
RDEVICE=$DEVICE
case "$RDEVICE" in
# hardcoded /dev since udev does not create these entries elsewhere
/dev/dm-[0-9]*)
read -r <"/sys/block/${RDEVICE#/dev/}/dm/name" SYSVOLUME 2>&1 && DEVICE="$DM_DEV_DIR/mapper/$SYSVOLUME"
read -r <"/sys/block/${RDEVICE#/dev/}/dev" MAJORMINOR 2>&1 || error "Cannot get major:minor for \"$DEVICE\"."
DEVMAJOR=${MAJORMINOR%%:*}
DEVMINOR=${MAJORMINOR##*:}
;;
*)
RSTAT=$("$STAT" --format "DEVMAJOR=\$((0x%t)) DEVMINOR=\$((0x%T))" "$RDEVICE" || true)
[ -n "$RSTAT" ] || error "Cannot get major:minor for \"$DEVICE\"."
eval "$RSTAT"
;;
esac
[ "$DEVMAJOR" != "$(grep device-mapper /proc/devices | cut -f1 -d' ')" ] && return
DEV="$("$DMSETUP" info -c -j "$DEVMAJOR" -m "$DEVMINOR" -o uuid,name --noheadings --nameprefixes --separator ' ')"
case "$DEV" in
Device*) ;; # no devices
*) eval "$DEV" ;;
esac
}
# parse yaml config files into 'prefix_yaml_part_names=("value")' strings
parse_yaml_() {
local yaml_file=$1
local prefix=$2
local s
local w
local fs
s='[[:space:]]*'
w='[a-zA-Z0-9_.-]*'
fs="$(echo @|tr @ '\034')"
(
sed -ne '/^--/s|--||g; s|\"|\\\"|g; s/[[:space:]]*$//g;' \
-e 's/\$/\\\$/g' \
-e "/#.*[\"\']/!s| #.*||g; /^#/s|#.*||g;" \
-e "s|^\($s\)\($w\)$s:$s\"\(.*\)\"$s\$|\1$fs\2$fs\3|p" \
-e "s|^\($s\)\($w\)${s}[:-]$s\(.*\)$s\$|\1$fs\2$fs\3|p" |
awk -F"$fs" '{
indent = length($1)/2;
if (length($2) == 0) { conj[indent]="+";} else {conj[indent]="";}
vname[indent] = $2;
for (i in vname) {if (i > indent) {delete vname[i]}}
if (length($3) > 0) {
vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
printf("%s%s%s%s=(\"%s\")\n", "'"$prefix"'",vn, $2, conj[indent-1], $3);
}
}' |
sed -e 's/_=/+=/g' |
awk 'BEGIN {
FS="=";
OFS="="
}
/(-|\.).*=/ {
gsub("-|\\.", "_", $1)
}
{ print }'
) < "$yaml_file"
}
#
# Convert VDO volume on LV to VDOPool within this VG
#
# This conversion requires the size of VDO virtual volume has to be expressed in the VG's extent size.
# Currently this enforces a user to reduce the VG extent size to the smaller size (up to 4KiB).
#
# TODO: We may eventually relax this condition just like we are doing rounding for convert_non_lv_()
# Let's if there would be any singly user requiring this feature.
# It may allow to better use larger VDO volume size (in TiB ranges).
#
convert_lv_() {
local vdo_logicalSize=$1
local extent_size
local pvfree
pvfree=$("$LVM" lvs -o size --units b --nosuffix --noheadings "$DM_VG_NAME/$DM_LV_NAME")
pvfree=$(( pvfree / 1024 )) # to KiB
# select largest possible extent size that can exactly express both sizes
extent_size=$(get_largest_extent_size_ "$pvfree" "$vdo_logicalSize")
# validate existing VG extent_size can express virtual VDO size
vg_extent_size=$("$LVM" vgs -o vg_extent_size --units b --nosuffix --noheadings "$VGNAME")
vg_extent_size=$(( vg_extent_size / 1024 ))
[ "$vg_extent_size" -le "$extent_size" ] || {
error "Please vgchange extent_size to at most $extent_size KiB or extend and align virtual size of VDO device on $vg_extent_size KiB before retrying conversion."
}
verbose "Renaming existing LV to be used as _vdata volume for VDO pool LV."
dry "$LVM" lvrename $YES $VERB "$VGNAME/$DM_LV_NAME" "$VGNAME/${LVNAME}_vpool" || {
error "Rename of LV \"$VGNAME/$DM_LV_NAME\" failed, while VDO header has been already moved!"
}
verbose "Converting to VDO pool."
dry "$LVM" lvconvert $YES $VERB $FORCE --config "$VDO_ALLOCATION_PARAMS" -Zn -V "${vdo_logicalSize}k" -n "$LVNAME" --type vdo-pool "$VGNAME/${LVNAME}_vpool"
verbose "Removing now unused VDO entry from VDO configuration."
dry "$VDO" remove $VDOCONF $VERB --force --name "$VDONAME"
}
#
# Convert VDO volume on a device to VG with VDOPool LV
#
# Convert device with the use of snapshot on top of original VDO volume (can be optionally disabled)
# Once the whole conversion is finished, snapshot is merged (During the short period time of merging
# user must ensure there will be no power-off!)
#
# For best use the latest version of vdoprepareforlvm tool is required.
convert_non_lv_() {
local vdo_logicalSize=$1
local vdo_logicalSizeRounded
local extent_size
local output
local pvfree
if [ -n "$USE_VDO_DM_SNAPSHOT" ]; then
dry snapshot_create_ "$DEVICE"
sed "s|$DEVICE|$VDO_DM_SNAPSHOT_DEVICE|" "$TEMPDIR/vdoconf.yml" > "$TEMPDIR/vdo_snap.yml"
# In case of error in the middle of conversion restore original config file
VDO_CONFIG_RESTORE="$TEMPDIR/vdoconf.yml"
# Let VDO manager operate on snapshot volume
dry cp -a "$TEMPDIR/vdo_snap.yml" "${VDO_CONFIG:-"$DEFAULT_VDO_CONFIG"}"
else
# If error in the following section, report possible problems ahead
VDO_INCONSISTENT=1
fi
# In case we operate with snapshot, all lvm2 operation will also run on top of snapshot
local device=${VDO_DM_SNAPSHOT_DEVICE:-$DEVICE}
# Check if there is not already an existing PV header, this would have fail on pvcreate after conversion
"$LVM" pvs --devices "$device" "$device" 2>/dev/null && {
error "Cannot convert volume \"$DEVICE\" with existing PV header."
}
verbose "Moving VDO header on \"$device\"."
output=$(dry "$VDO" convert $VDOCONF $VERB --force --name "$VDONAME" 2>&1) || {
local rc=$?
echo "$output"
error "Failed to convert VDO volume \"$DEVICE\" (exit code $rc)."
}
echo "$output"
if [ "$ABORT_AFTER_VDO_CONVERT" != "0" ]; then
warn "Aborting VDO conversion after moving VDO header, volume is useless!"
return 0
fi
# Parse result from VDO preparation/conversion tool
# New version of the tool provides output with alignment and offset
local vdo_length=0
local vdo_aligned=0
local vdo_offset=0
local vdo_non_converted=0
while IFS= read -r line ; do
# trim leading spaces
case "$(echo $line)" in
"Non converted"*) vdo_non_converted=1 ;;
"Length"*) vdo_length=${line##* = } ;;
"Conversion completed"*)
vdo_aligned=${line##*aligned on }
vdo_aligned=${vdo_aligned%%[!0-9]*}
vdo_offset=${line##*offset }
# backward compatibility with report from older version
vdo_offset=${vdo_offset##*by }
vdo_offset=${vdo_offset%%[!0-9]*}
;;
esac
done <<< "$output"
dry "$LVM" pvcreate $YES $VERB $FORCE --devices "$device" --dataalignment "$vdo_offset"b "$device"
# Obtain free space in this new PV
# after 'vdo convert' call there is ~(1-2)M free space at the front of the device
pvfree=$("$BLOCKDEV" --getsize64 "$DEVICE")
pvfree=$(( ( pvfree - vdo_offset ) / 1024 )) # to KiB
if [ -n "$vdo_aligned" ] && [ "$vdo_aligned" != "0" ]; then
extent_size=$(( vdo_aligned / 1024 ))
else
extent_size=$(get_largest_extent_size_ "$pvfree" "$vdo_logicalSize")
fi
# Round virtual size to the LOWER size expressed in extent units.
# lvm is parsing VDO metadata and can read real full size and use it instead of this smaller value.
# To precisely byte-synchronize the size of VDO LV, user can lvresize such VDO LV later.
vdo_logicalSizeRounded=$(( ( vdo_logicalSize / extent_size ) * extent_size ))
verbose "Creating volume group \"$VGNAME\" with the extent size $extent_size KiB."
dry "$LVM" vgcreate $YES $VERB --devices "$device" -s "${extent_size}k" "$VGNAME" "$device"
verbose "Creating VDO pool data LV from all extents in the volume group \"$VGNAME\"."
dry "$LVM" lvcreate -Zn -Wn -an $YES $VERB --devices "$device" -l100%VG -n "${LVNAME}_vpool" "$VGNAME" "$device"
verbose "Converting to VDO pool."
dry "$LVM" lvconvert ${USE_VDO_DM_SNAPSHOT:-"$YES"} $VERB $FORCE --devices "$device" --config "$VDO_ALLOCATION_PARAMS" -Zn -V "${vdo_logicalSizeRounded}k" -n "$LVNAME" --type vdo-pool "$VGNAME/${LVNAME}_vpool"
if [ "$vdo_logicalSizeRounded" -lt "$vdo_logicalSize" ]; then
# need to extend virtual size to be covering all the converted area
# let lvm2 to round to the proper virtual size of VDO LV
dry "$LVM" lvextend $YES $VERB --devices "$device" -L "$vdo_logicalSize"k "$VGNAME/$LVNAME"
fi
VDO_INCONSISTENT=
[ -z "$USE_VDO_DM_SNAPSHOT" ] && return # no-snapshot case finished
dry "$LVM" vgchange -an $VERB $FORCE --devices "$device" "$VGNAME"
# Prevent unwanted auto activation when VG is merged
dry "$LVM" vgchange --setautoactivation n $VERB $FORCE --devices "$device" "$VGNAME"
if [ -z "$YES" ]; then
PROMPTING=yes
warn "Do not interrupt merging process once it starts (VDO data may become irrecoverable)!"
echo -n "$TOOL: Do you want to merge converted VDO device \"$DEVICE\" to VDO LV \"$VGNAME/$LVNAME\"? [y|N]: "
read -r -n 1 -s ANSWER
case "${ANSWER:0:1}" in
y|Y ) echo "Yes" ;;
* ) echo "No" ; PROMPTING=""; return 1 ;;
esac
PROMPTING=""
YES="-y" # From now, now prompting
fi
dry snapshot_merge_ "$DEVICE"
# For systems using devicesfile add 'merged' PV into system.devices.
# Bypassing use of --valuesonly to keep compatibility with older lvm.
local usedev=$("$LVM" lvmconfig --typeconfig full devices/use_devicesfile || true)
[ "${usedev#*=}" = "1" ] && dry "$LVM" lvmdevices --adddev "$DEVICE"
# Restore auto activation for a VG
dry "$LVM" vgchange --setautoactivation y $VERB $FORCE "$VGNAME"
dry "$LVM" lvchange -ay $VERB $FORCE "$VGNAME/$LVNAME"
}
# Convert existing VDO volume into lvm2 volume
convert2lvm_() {
local VDONAME
local TRVDONAME
local FOUND=""
local MAJOR=0
local MINOR=0
VGNAME=${NAME%/*}
LVNAME=${NAME#*/}
DM_UUID=""
detect_lv_ "$DEVICE"
case "$DM_UUID" in
LVM-*) eval "$("$DMSETUP" splitname --nameprefixes --noheadings --separator ' ' "$DM_NAME")"
if [ -z "$VGNAME" ] || [ "$VGNAME" = "$LVNAME" ]; then
VGNAME=$DM_VG_NAME
verbose "Using existing volume group name \"$VGNAME\"."
[ -n "$LVNAME" ] || LVNAME=$DM_LV_NAME
elif [ "$VGNAME" != "$DM_VG_NAME" ]; then
error "Volume group name \"$VGNAME\" does not match name \"$DM_VG_NAME\" for VDO device \"$DEVICE\"."
fi
;;
*)
# Check if we need to generate unused $VGNANE
if [ -z "$VGNAME" ] || [ "$VGNAME" = "$LVNAME" ]; then
VGNAME=${DEFAULT_NAME%/*}
# Find largest matching VG name to our 'default' vgname
LASTVGNAME=$(LC_ALL=C "$LVM" vgs -oname -O-name --noheadings -S name=~"${VGNAME}" | grep -m 1 -E "${VGNAME}[0-9]? ?" || true)
if [ -n "$LASTVGNAME" ]; then
LASTVGNAME=${LASTVGNAME#*"${VGNAME}"}
# If the number is becoming too high, try some random number
[ -n "$LASTVGNAME" ] && [ "$LASTVGNAME" -gt 99999999 ] && LASTVGNAME=$RANDOM
# Generate new unused VG name
VGNAME="${VGNAME}$(( LASTVGNAME + 1 ))"
verbose "Selected unused volume group name \"$VGNAME\"."
fi
fi
# New VG is created, LV name should be always unused.
[ -n "$LVNAME" ] || LVNAME=${DEFAULT_NAME#*/}
"$LVM" vgs "$VGNAME" >/dev/null 2>&1 && error "Cannot use already existing volume group name \"$VGNAME\"."
;;
esac
verbose "Checked whether device \"$DEVICE\" is already logical volume."
"$MKDIR" -p -m 0000 "$TEMPDIR" || error "Failed to create \"$TEMPDIR\"."
# TODO: might use directly /etc/vdoconf.yml (avoiding need of 'vdo' manager)
verbose "Getting YAML VDO configuration."
"$VDO" printConfigFile $VDOCONF >"$TEMPDIR/vdoconf.yml"
[ -s "$TEMPDIR/vdoconf.yml" ] || error "Cannot work without VDO configuration."
# Check list of devices in VDO configure file for their major:minor
# and match with given $DEVICE devmajor:devminor
for i in $(awk '/.*device:/ {print $2}' "$TEMPDIR/vdoconf.yml") ; do
local DEV
DEV=$("$READLINK" $READLINK_E "$i") || continue
RSTAT=$("$STAT" --format "MAJOR=\$((0x%t)) MINOR=\$((0x%T))" "$DEV" 2>/dev/null) || continue
eval "$RSTAT"
if [ "$MAJOR" = "$DEVMAJOR" ] && [ "$MINOR" = "$DEVMINOR" ]; then
[ -z "$FOUND" ] || error "VDO configuration contains duplicate entries $FOUND and $i."
FOUND=$i
fi
done
[ -n "$FOUND" ] || error "Can't find matching device in VDO configuration file."
verbose "Found matching device $FOUND $MAJOR:$MINOR."
VDONAME=$(awk -v DNAME="$FOUND" '/.*VDOService$/ {VNAME=substr($1, 0, length($1) - 1)} /[[:space:]]*device:/ { if ($2 ~ DNAME) {print VNAME}}' "$TEMPDIR/vdoconf.yml")
TRVDONAME=$(echo "$VDONAME" | tr '-' '_')
# When VDO volume is 'active', check it's not mounted/being used
DM_OPEN="$("$DMSETUP" info -c -o open "$VDONAME" --noheadings --nameprefixes 2>/dev/null || true)"
case "$DM_OPEN" in
Device*) ;; # no devices
*) eval "$DM_OPEN"
[ "${DM_OPEN:-0}" -eq 0 ] || error "Cannot convert in use VDO volume \"$VDONAME\"!"
;;
esac
#parse_yaml_ "$TEMPDIR/vdoconf.yml" _
eval "$(parse_yaml_ "$TEMPDIR/vdoconf.yml" _ | grep "$TRVDONAME" | sed -e "s/_config_vdos_$TRVDONAME/vdo/g")"
vdo_logicalSize=$(get_kb_size_with_unit_ "$vdo_logicalSize")
vdo_physicalSize=$(get_kb_size_with_unit_ "$vdo_physicalSize")
verbose "Converted VDO device has logical/physical size $vdo_logicalSize/$vdo_physicalSize KiB."
VDO_ALLOCATION_PARAMS=$(cat <<EOF
allocation {
vdo_use_compression = $(get_enabled_value_ "$vdo_compression")
vdo_use_deduplication = $(get_enabled_value_ "$vdo_deduplication")
vdo_use_metadata_hints=1
vdo_minimum_io_size = $vdo_logicalBlockSize
vdo_block_map_cache_size_mb = $(( $(get_kb_size_with_unit_ "$vdo_blockMapCacheSize") / 1024 ))
vdo_block_map_period = $vdo_blockMapPeriod
vdo_use_sparse_index = $(get_enabled_value_ "$vdo_indexSparse")
vdo_index_memory_size_mb = $(awk "BEGIN {print $vdo_indexMemory * 1024}")
vdo_slab_size_mb = $(( $(get_kb_size_with_unit_ "$vdo_slabSize") / 1024 ))
vdo_ack_threads = $vdo_ackThreads
vdo_bio_threads = $vdo_bioThreads
vdo_bio_rotation = $vdo_bioRotationInterval
vdo_cpu_threads = $vdo_cpuThreads
vdo_hash_zone_threads = $vdo_hashZoneThreads
vdo_logical_threads = $vdo_logicalThreads
vdo_physical_threads = $vdo_physicalThreads
vdo_write_policy = $vdo_writePolicy
vdo_max_discard = $(( $(get_kb_size_with_unit_ "$vdo_maxDiscardSize") / 4 ))
vdo_pool_header_size = 0
}
EOF
)
verbose "VDO conversion parameters: $VDO_ALLOCATION_PARAMS"
verbose "Stopping VDO volume."
dry "$VDO" stop $VDOCONF --name "$VDONAME" $VERB
# If user has not provided '--yes', prompt before conversion
if [ -z "$YES" ] && [ -z "$USE_VDO_DM_SNAPSHOT" ]; then
PROMPTING=yes
echo -n "$TOOL: Convert VDO device \"$DEVICE\" to VDO LV \"$VGNAME/$LVNAME\"? [y|N]: "
read -r -n 1 -s ANSWER
case "${ANSWER:0:1}" in
y|Y ) echo "Yes" ;;
* ) echo "No" ; PROMPTING=""; return 1 ;;
esac
PROMPTING=""
YES="-y" # From now, no prompting
fi
# Make a backup of the existing VDO yaml configuration file
[ -e "$VDO_CONFIG" ] && dry cp -a "$VDO_CONFIG" "${VDO_CONFIG}.backup"
DEVICE=$FOUND
case "$DM_UUID" in
LVM-*) convert_lv_ "$vdo_logicalSize" ;;
*) convert_non_lv_ "$vdo_logicalSize" ;;
esac
}
#############################
# start point of this script
# - parsing parameters
#############################
trap "cleanup" "${SIGNALS[@]}"
[ "$#" -eq 0 ] && tool_usage
while [ "$#" -ne 0 ]
do
case "$1" in
"") ;;
"-f"|"--force" ) FORCE="-f" ;;
"-h"|"--help" ) tool_usage ;;
"-n"|"--name" ) shift; NAME=$1 ;;
"-v"|"--verbose") VERB="--verbose" ;;
"-y"|"--yes" ) YES="-y" ;;
"--abort-after-vdo-convert"|"--abortaftervdoconvert" ) ABORT_AFTER_VDO_CONVERT=1; USE_VDO_DM_SNAPSHOT= ;; # For testing only
"--dry-run"|"--dryrun" ) DRY="1" ; VERB="-v" ;;
"--no-snapshot"|"--nosnapshot" ) USE_VDO_DM_SNAPSHOT= ;;
"--uuid-prefix"|"--uuidprefix" ) shift; DM_UUID_PREFIX=$1 ;; # For testing only
"--vdo-config"|"--vdoconfig" ) shift; VDO_CONFIG=$1 ; VDOCONF="-f $VDO_CONFIG" ;;
-* ) error "Wrong argument \"$1\". (see: $TOOL --help)" ;;
*) DEVICE=$1 ;; # device name does not start with '-'
esac
shift
done
[ -n "$DEVICE" ] || error "Device name is not specified. (see: $TOOL --help)"
convert2lvm_
Hacked By AnonymousFox1.0, Coded By AnonymousFox