Hacked By AnonymousFox
Changes in version 2.50
-----------------------
* Fix bug https://rt.cpan.org/Ticket/Display.html?id=120231.
* Fix bug https://rt.cpan.org/Ticket/Display.html?id=120300.
Unfortunately, this withdraws a small part of fix 114999.
GNU getopt_long() does not accept the (optional)
argument to be passed to the option without = sign.
We do, since not doing so breaks existing scripts.
* Provide a default value for options (gnu_compat mode).
Thanks to Andrew Gregory.
Changes in version 2.49.1
-------------------------
* Emergency fix Makefile.PL for non-GNUmake.
Changes in version 2.49
-----------------------
* Fix bug https://rt.cpan.org/Ticket/Display.html?id=114999
Thanks Roy Ivy III for finding and fixing this.
* Fix bug https://rt.cpan.org/Ticket/Display.html?id=113748
Thanks Tom Wyant for finding and fixing this.
Changes in version 2.48
-----------------------
* Fix bug https://rt.cpan.org/Ticket/Display.html?id=39052.
Thanks to Roy Ivy III for digging this out and providing patches.
Changes in version 2.47
-----------------------
* Fix bug https://rt.cpan.org/Ticket/Display.html?id=89513.
Should have done that earlier :)
This changes the format for accepted float numbers:
<optional sign>
<optional mantissa>
<optional dec.point and fraction>
<optional "e" and exponent>
Mantissa and decimal fraction may not both be omitted.
Underscores are permissible virtually anywhere in numbers for clarity.
Changes in version 2.46
-----------------------
* Fix bug https://rt.cpan.org/Ticket/Display.html?id=104842
Kudo's to EDAVIS for finding this very obscure bug.
* Some small changes/additions to the test suite and examples.
Changes in version 2.45
-----------------------
* Revert behaviour of the combination of <> and pass_through to what
is was in 2.42.
Thanks to Wilson Snyder to provide enhancements to the documentation
to clarify why <> and pass_through generally is a bad idea.
It is, however, very unfortunate to hear from users that their
programs *depend* on the undocumented pre-2.43 behaviour.
Changes in version 2.44
-----------------------
* Be gentle to the user community and turn fix 92462 into a warning.
This may be changed back to error in some future release.
Changes in version 2.43
-----------------------
* Fix bug https://rt.cpan.org/Ticket/Display.html?id=92462
* Implement enhancement
https://rt.cpan.org/Public/Bug/Display.html?id=101237
* Fix the Getopt::Long part of bug
https://rt.cpan.org/Ticket/Display.html?id=100335
Changes in version 2.42
-----------------------
* Fix bug https://rt.cpan.org/Ticket/Display.html?id=88707
Changes in version 2.41
-----------------------
* Change INSTALLDIRS to site for perl >= 5.011.
See https://rt.perl.org/rt3//Ticket/Display.html?id=116479
for details.
Changes in version 2.40
-----------------------
* Fix bug #86095 Possible problem with aliases
* Fix bug #85362 typo fix
Changes in version 2.39
-----------------------
* Fix unneccessary warnings when @ARGV contains undefs (yes, it
happens).
* Passing an object as first argument to the callback handler for <>
turned out to be a problem in cases where the argument was passed to
other modules, e.g., Archive::Tar. Revert the change since the added
functionality of the object is not really relevant for the <>
callback function.
* Silence the deprecation warnings from newgetopt.pl for the purpose
of testing. These tests will be removed along with newgetopt.pl in
the next major release of perl.
http://perl5.git.perl.org/perl.git/commit/b814bbfa9a2087bc
* Eliminiate spurious warning.
* Retain taintedness of command line option values.
* Document that you need to check GetOptions return value :).
* Several other minor documentation fixes and enhancements.
* Fix bug #67577 Parsing of type 'o' not correct for multiple values
Changes in version 2.38
-----------------------
* Bugfix for Ticket 35759: First arg to callback function evaluates
to false when used in bool context.
* Fix problem with prototypes of GetOptionsFrom* functions.
* Fix restoring default die handler.
* Bugfix for Ticket 24941: Autoabbrev with + incorrect.
* Bugfix: Reject syntax 'foo|!' for option spec. This was illegal
anyway.
Changes in version 2.37
-----------------------
* The first argument to callback function is now an object and will
get methods for finer control in the future. The object stringifies
to the option name, so current code should not notice a difference.
* Bugfix: With gnu_compat, --foo= will no longer trigger "Option
requires an argument" but return the empty string.
Changes in version 2.36
-----------------------
**************** WARNING -- EXPERIMENTAL CODE AHEAD ****************
* Parsing options from an arbitrary array
The entry point GetOptionsFromArray (exported on demand) can be used
to parse command line options that are not passed in via @ARGV, but
using an arbitrary array.
use Getopt::Long qw(GetOptionsFromArray);
$ret = GetOptionsFromArray(\@myopts, ...);
* Parsing options from an arbitrary string
The entry point GetOptionsFromString (exported on demand) can be
used to parse command line options that are not passed in via @ARGV,
but using an arbitrary string.
use Getopt::Long qw(GetOptionsFromString);
$ret = GetOptionsFromString($optstring, ...);
Note that upon completion, no arguments may remain in the string.
If arguments may remain, call it in list context:
($ret, $args) = GetOptionsFromString($optstring, ...);
@$args will have the remaining arguments.
**************** END EXPERIMENTAL CODE ****************
* Number values for options may include underscores for readability
(just like Perls numbers).
* Bugfix for Ticket #19432 (found and fixed by khali).
* Bugfix to make it cooperate with the bignum pragma. Thanks to Merijn
and Yves.
* Various small fixes to make the test suite run under 5.004_05.
* More examples (skeletons).
Changes in version 2.35
-----------------------
* long_prefix_pattern configuration variable.
prefix_pattern has now been complemented by a new configuration
option 'long_prefix_pattern' that allows the user to specify what
prefix patterns should have long option style semantics applied.
This will enable people to do things like
foo.pl /option=value
instead of forcing people to use the short option style
foo.pl /option value
This enhancement was suggested and implemented by Yves Orton.
* Bugfix for Ticket #11377 (bug found and fixed by Ryan).
* Bugfix for Ticket #12380.
* Options can take multiple values at once. E.g.,
--coordinates 52.2 16.4 --rgbcolor 255 255 149
To handle the above command line, the following call to GetOptions
can be used:
GetOptions('coordinates=f{2}' => \@coor, 'rgbcolor=i{3}' => \@color);
You can specify the minimum and maximum number of values desired.
The syntax for this is similar to that of regular expression
patterns: { min , max }.
Changes in version 2.34
-----------------------
* Auto-vivification of array and hash refs
If an option is specified to require an array or hash ref, and a
scalar reference is passed, this is auto-vivified to array or hash
ref.
Example:
@ARGV = qw(--foo=xx);
GetOptions("foo=s@", \$var);
# Now $var->[0] eq "xx"
* Auto-supplied verbose and help options are no longer taken into
account when determining option ambiguity. This eliminates the
common problem that you suddenly get an ambiguous option warning
when you have an option "verbose" and run your program with "-v".
* Cosmetic changes in some error messages.
Changes in version 2.33
-----------------------
The following new features are marked experimental. This means that if
you are going to use them you _must_ watch out for the next release of
Getopt::Long to see if the API has changed.
* Getopt::Long can automatically handle --version and --help options
if the calling program did not specify a handler explicitly.
Two configuration parameters have been added: 'auto_help' (or
'help') and 'auto_version' (or 'version'). If set, Getopt::Long will
itself take care of --help and --version options. Otherwise,
everything is exactly as it was before.
The new features will be enabled by default for programs that
explicitly require version 2.3203 or later.
Getopt::Long uses module Pod::Usage to produce the help message from
the SYNOPSIS section of the program's POD.
Using a --help (or -?) command line option will write the SYNOPSIS
section of the program's POD to STDOUT, and exit with status 0.
However, an illegal option will produce the help text to STDERR,
and exit with status 2. This is in accordance with current
conventions.
* Two subroutines can be exported on demand:
- VersionMessage
This subroutine prints the standard version message.
- HelpMessage
This subroutine prints the standard help message.
Both subroutines take the same arguments as Pod::Usage::pod2usage,
see its documentation for details.
Example:
use Getopt::Long 2.33 qw(GetOptions HelpMessage);
GetOptions(...) or HelpMessage(2);
* Subroutine Configure can now be exported on demand.
* Negatable options (with "!") now also support the "no-" prefix.
On request of Ed Avis.
* Some fixes with hashes and bundling.
Thanks to Anders Johnson and Andrei Gnepp.
Mandatory/optional status for hash values is now effective.
String valued options with no value now default to the empty string
instead of 1 (one).
NOTE: The hash options still remain more or less experimental.
* Fix a pass_through bug where the options terminator (normally "--")
was not passed through in @ARGV.
Thanks to Philippe Verdret.
* Add FAQ: I "use GetOpt::Long;" (Windows) and now it doesn't work.
Changes in version 2.32
-----------------------
* Fix a bug where the initial value for a optional numeric argument
was not used for value of a hash option.
* Remove 5.005 thread safety code. Getopt::Long is completely thread
safe when using the 5.8 ithreads.
Changes in version 2.31
-----------------------
* Fix a bug where calling the configure method on a
Getopt::Long::Parser object would bail out with
Undefined subroutine &Getopt::Long::Parser::Configure called at
Getopt/Long.pm line 186.
Changes in version 2.30
-----------------------
* Fix a problem where a 'die' from a 'warn' via a localized
$SIG{__WARN__} was not properly propagated from a callback.
Thanks to Diab Jerius.
Changes in version 2.29
-----------------------
* Fix a problem where options were not recognized when both
auto_abbrev and ignore_case were disabled. Thanks to Seth Robertson.
* Remove Carp.
Changes in version 2.28
-----------------------
* When an option is specified more than once, a warning is generated
if perl is run with -w. This is a correction to 2.27, where it would
unconditionally die.
An example of duplicate specification is GetOptions('foo', 'foo'),
but also GetOptions('foo=s', 'foo') and GetOptions('Foo', 'foo')
(the latter only when ignore_case is in effect).
Changes in version 2.27
-----------------------
* You can now specify integer options to take an optional argument.
that defaults to a specific value. E.g., GetOptions('foo:5' => \$var)
will allow $var to get the value 5 when no value was specified with
the -foo option on the command line.
Instead of a value, a '+' may be specified. E.g.,
GetOptions('foo:+' => \$var) will allow $var to be incremented when
no value was specified with the -foo option on the command line.
* Fix several problems with internal and external use of 'die' and
signal handlers.
* Fixed some bugs with subtle combinations of bundling_override and
ignore_case.
* A callback routine that is associated with a hash-valued option will
now have both the hask key and the value passed. It used to get only
the value passed.
* Eliminated the use of autoloading. Autoloading kept generating
problems during development, and when using perlcc.
* Avoid errors on references when an option is found in error, e.g.
GetOptions('fo$@#' => \$var).
Thanks to Wolfgang Laun.
* When an option is specified more than once, an error is now
generated. E.g., GetOptions('foo', 'foo').
Thanks to Wolfgang Laun.
* Lots of internal restructuring to make room for extensions.
* Redesigned the regression tests.
* Enhance the documentation to prevent common misunderstandings about
single character options.
Changes in version 2.26
-----------------------
* New option type: 'o'. It accepts all kinds of integral numbers in
Perl style, including decimal (24), octal (012), hexadecimal (0x2f)
and binary (0b1001).
* Fix problem with getopt_compat not matching +foo=bar.
* Remove $VERSION_STRING for production versions.
Changes in version 2.25
-----------------------
* Change handling of a lone "-" on the command line. It will now be
treated as a non-option unless an explicit specification was passed
to GetOptions. See the manual.
In the old implementation an error was signalled, so no
compatibility breaks are expected from this change.
* Add $VERSION_STRING. This is the string form of $VERSION. Usually
they are identical, unless it is a pre-release in which case
$VERSION will be (e.g.) 2.2403 and $VERSION_STRING will be "2.24_03".
Changes in version 2.24
-----------------------
* Add object oriented interface:
use Getopt::Long;
$p = new Getopt::Long::Parser;
$p->configure(...configuration options...);
if ($p->getoptions(...options descriptions...)) ...
* Add configuration at 'use' time:
use Getopt::Long qw(:config no_ignore_case bundling);
* Add configuration options "gnu_getopt" and "gnu_compat".
"gnu_compat" controls whether --opt= is allowed, and what it should
do. Without "gnu_compat", --opt= gives an error. With "gnu_compat",
--opt= will give option "opt" and empty value.
This is the way GNU getopt_long does it.
"gnu_getopt" is a short way of setting "gnu_compat bundling permute
no_getopt_compat. With "gnu_getopt", command line handling should be
fully compatible with GNU getopt_long.
* Correct warnings when the user specified an array or hash
destination using a non-lowercase option, e.g. "I=s@".
* Correct ambiguous use of 'set' and 'reset' in the Configuration
section of the documentation.
* Add configuration option "posix_default" to reset to defaults as if
POSIXLY_CORRECT were set.
* Disallow "no" prefix on configuration options "default", "prefix" and
"prefix_pattern".
* Add a section "Trouble Shooting" to the documentation, with
frequently asked questions.
Changes in version 2.23
-----------------------
* When a call-back routine issues 'die', messages starting with "!"
are treated specially. Currently, only "!FINISH" is recognised (see
the next bullet point). Other messages that start with "!" are
ignored.
* Change 'die("FINISH") (see changes in 2.21) to die("!FINISH"). This
is an incompatible change, but I guess noone is using this yet.
Changes in version 2.22
-----------------------
* Fixes a bug in the combination of aliases and negation.
Old: "foo|bar!" allowed negation on foo, but not on bar.
New: "foo|bar!" allows negation on foo and bar.
Caveat: "foo|f!", with bundling, issues the warning that negation on
a short option is ignored. To obtain the desired behaviour, use
"foo!" => \$opt_foo, "f" => \$opt_foo
or
"foo|f" => \$opt_foo, "nofoo" => sub { $opt_foo = 0 }
Remember that this is _only_ required when bundling is in effect.
Changes in version 2.21
-----------------------
* New documentation.
* User defined subroutines should use 'die' to signal errors.
* User defined subroutines can preliminary terminate options
processing by calling die("FINISH");
* Correct erroneous install of Getopt::Long manpage.
Previous versions seem to install Getopt::GetoptLong instead of
Getopt::Long.
Changes in version 2.20
-----------------------
* Prevent the magic argument "<>" from being interpreted as option
starter characters if it is the first argument passed.
To use the characters "<>" as option starters, pass "><" instead.
* Changed license: Getopt::Long may now also be used under the Perl
Artistic License.
* Changed the file name of the distribution kit from "GetoptLong..."
to "Getopt-Long-..." to match the standards.
Changes in version 2.19
-----------------------
* Fix a warning bug with bundling_override.
There's no version 2.18
-----------------------
Changes in version 2.17
-----------------------
* Getopt::Long::config is renamed Getopt::Long::Configure. The old
name will remain supported without being documented.
* Options can have the specifier '+' to denote that the option value
must be incremented each time the option occurs on the command line.
For example:
my $more = 2;
Getopt::Long::Configure("bundling");
GetOptions ("v+" => \$more);
print STDOUT ("more = $more\n");
will print "more = 3" when called with "-v", "more = 4" when called
with "-vv" (or "-v -v"), and so on.
* Getopt::Long now uses autoloading. This substantially reduces the
resources required to 'use Getopt::Long' (about 100 lines of over
1300 total).
* It is now documented that global option variables like $opt_foo
need to be declared using 'use vars ...' when running under 'use
strict'.
* To install, it is now required to use the official procedure:
perl Makefile.PL
make
make test
make install
Changes in version 2.16
-----------------------
* A couple of small additional fixes to the $` $& $' fixes.
* The option prefix can be set using config("prefix=...") or, more
powerful, with config("prefix_pattern=..."); see the documentation
for details.
* More 'perl -w' warnings eliminated for obscure cases of bundling.
This version is identical to 2.15, which was not released.
There's no version 2.14
-----------------------
Changes in version 2.13
-----------------------
* All regexps are changed to avoid the use of $`, $& and $'. Using one
of these causes all pattern matches in the program to be much slower
than necessary.
* Configuration errors are signalled using die() and will cause the
program to be terminated (unless eval{...} or $SIG{__DIE__} is
used).
* Option parsing errors are now signalled with calls to warn().
* In option bundles, numeric values may be embedded in the bundle
(e.g. -al24w80).
* More 'perl -w' warnings eliminated for obscure cases of bundling.
* Removed non-standard version number matching. Version 1.121 is now
more than 1.12 but less than 1.13.
Changes in version 2.12
-----------------------
* A single question mark is allowed as an alias to an option, e.g.
GetOptions ("help|?", ...)
Changes in version 2.11
-----------------------
* User linkage may be an object, provided the object is really a hash.
For example:
{ package Foo;
sub new () { return bless {}; }
}
my $linkage = Foo->new();
GetOptions ($linkage, ... );
* Some bug fixes in handling obscure cases of pass-through.
Changes in version 2.9
----------------------
* A new way to configure Getopt::Long. Instead of setting module local
variables, routine Getopt::Long::config can be called with the names
of options to be set or reset, e.g.
Getopt::Long::config ("no_auto_abbrev", "ignore_case");
Configuring by using the module local variables is deprecated, but
it will continue to work for backwark compatibility.
Changes in version 2.6
----------------------
* Handle ignorecase even if autoabbrev is off.
* POD corrections.
Changes in version 2.4
----------------------
* Pass-through of unrecognized options. Makes it easy to write wrapper
programs that process some of the command line options but pass the
others to another program.
* Options can be of type HASH, now you can say
--define foo=bar
and have $opt_define{"foo"} set to "bar".
* An enhanced skeleton program, skel2.pl, that combines the power of
Getopt::Long with Pod::Usage.
Module Pod::Usage can be obtained from CPAN,
http://www.perl.com/CPAN/authors/Brad_Appleton.
Possible incompatibility in version 2.4
---------------------------------------
Previous versions of Getopt::Long always downcased the option variable
names when ignorecase was in effect. This bug has been corrected. As a
consequence, &GetOptions ("Foo") will now set variable $opt_Foo
instead of $opt_foo.
Hacked By AnonymousFox1.0, Coded By AnonymousFox